Payment & Shipping Terms:
|Power Source:||220-240V AC||Detection Range:||12±2m|
|Rated Load:||1200W (Resistive Load Like Incandescent Lamp)||Color:||White / Black|
White Security PIR Infrared Sensor Detector Movement Switch Two Color 12 Meter
This infrared motion sensor is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication
Power source : 220-240V AC
Detection angle : 180°
Detection distance : 12±2m
Power frequency : 50Hz
Ambient light : 3-2000LUX(adjustable)
Rated load : 1200W (Resistive load like incandescent lamp)
300W (inductive load such as LED, energy saving lamp )
Working temperature : -20~+40℃
Time-delay : min : 10sec ± 3sec
Max : 8min ± 2min
Power consumption : 0.45W (work)
Working humidity : <93%RH
Installation height : 1.8m-2.5m
Detection motion speed : 0.6-1.5m/s
IP Grade : IP44(Suitable for indoor and outdoor)
Color : Black, White
1. Detection field: The wide detection range is made up of up and down, left and right (see the following diagram), the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity.
2. Identify day and night automatically: The ambient light of ST09 could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.
3. Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
4. Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec,the maximum is 7min±2min.
Installation: (see the diagram)
1. Shut off power.
2. Loosen the screw on the bottom lid, open the wiring hole, pass the wire of power and load through the bottom lid.
3. Fix the bottom lid with inflated screw on the selected position.
4. Connect the power and load wire into connection-wire column according to the connecting figure.
5. Put the sensor on the bottom lid, twist the screw tightly then electrify it and test it.
1. Turn time knob anti-clockwise to the minimum; turn the LUX knob clockwise to the maximum (SUN), Switch on power, the controlled load should not work, needing to preheat within 5-30sec.
2. The sensor will be sensed again in 5-10sec later when the first induction is finished, the load should work when received sensor signal and stop working within 7-13sec with no any sensor signal.
3. Turn LUX knob to minimum anti-clockwise, if you test it when the ambient light is more than 3LUX, the induction load would not work after the load stops working; the load should work if you cover the detection window with opaque object (towel etc),it would be regular the load stops to work within 7-13sec under no induction signal condition.
Note: when testing in daylight, please turn LUX knob to (SUN) position, otherwise the sensor lamp could not work!
1. Should be installed by electrician or experienced person.
2. Avoid installing it on the unrest object.
3. There should be no hindrance and moving objects in front of the detection windows to effect
4. Avoid installing it near air temperature alteration zones such as air condition, central heating, etc.
5. Considering your safety, please do not open the cover when you find the hitch after installation.
6. If there is difference between instruction and the function the product has, please give priority to product and sorry not to inform you additionally.